(1) A rotorcraft operator's exposition must include the following:
(a) procedures to determine the kinds of information mentioned in subregulation (2) for a flight of the rotorcraft in relation to the following:
(i) the departure aerodrome;
(ii) the planned destination aerodrome;
(iii) if a destination alternate aerodrome is required for the flight by the flight preparation (alternate aerodromes) requirements--the destination alternate aerodrome;
(b) procedures for the pilot in command to plan a take - off from, or a landing at, an aerodrome, including a procedure to determine the kinds of information mentioned in subregulation (2) in relation to the aerodrome.
(2) The kinds of information are the following:
(a) final approach and take - off area dimensions, directions, slopes, surface types and ground or water types for the aerodrome;
(b) touch down and lift - off area dimensions, limitations and location;
(c) the location of taxiways and turning nodes (if any);
(d) the aerodrome's elevation;
(e) the location on the aerodrome of the aerodrome reference point (if any);
(f) the location of the aerodrome's windsocks (if any);
(g) the aids to navigation and communication facilities available at the aerodrome (if any);
(h) the limitations (if any) on the use of the aerodrome;
(i) the special procedures (if any) in use at the aerodrome, in flight or on the ground or water;
(j) a contact person capable of providing information about the condition of the aerodrome;
(k) the special procedures and restrictions (if any) that the operator requires the flight crew of the rotorcraft to use at the aerodrome, including:
(i) engine failure procedures; and
(ii) obstacle clearance procedures.