Commonwealth Consolidated Regulations

[Index] [Table] [Search] [Search this Regulation] [Notes] [Noteup] [Previous] [Next] [Download] [Help]

CIVIL AVIATION SAFETY REGULATIONS 1998 - REG 135.195

Procedures to determine information about aerodromes

  (1)   An aeroplane operator's exposition must include the following:

  (a)   procedures to determine the kinds of information mentioned in subregulation   (2) for a flight of the aeroplane in relation to the following:

  (i)   the departure aerodrome;

  (ii)   the planned destination aerodrome;

  (iii)   if a destination alternate aerodrome is required for the flight by the flight preparation (alternate aerodromes) requirements--the destination alternate aerodrome;

  (b)   procedures for the pilot in command to plan a take - off from, or a landing at, an aerodrome, including a procedure to determine the kinds of information mentioned in subregulation   (2) in relation to the aerodrome.

  (2)   The kinds of information are the following:

  (a)   runway or strip lengths, widths, directions, slopes and surface types for the aerodrome;

  (b)   the location of taxiways and turning nodes (if any);

  (c)   the aerodrome's elevation;

  (d)   the location on the aerodrome of the aerodrome reference point (if any);

  (e)   the location of the aerodrome's windsocks (if any);

  (f)   the aids to navigation and communication facilities available at the aerodrome (if any);

  (g)   the limitations (if any) on the use of the aerodrome;

  (h)   the special procedures (if any) in use at the aerodrome, in flight or on the ground or water;

  (i)   a contact person capable of providing information about the condition of the aerodrome;

  (j)   the special procedures and restrictions (if any) that the operator requires the flight crew of the aeroplane to use at the aerodrome, including:

  (i)   engine failure procedures; and

  (ii)   obstacle clearance procedures.


AustLII: Copyright Policy | Disclaimers | Privacy Policy | Feedback