New South Wales Consolidated Regulations

WORK HEALTH AND SAFETY REGULATION 2017 - REG 211

211 Emergency stops

(1) If plant at a workplace is designed to be operated or attended by more than 1 person and more than 1 emergency stop control is fitted, the person with management or control of plant at the workplace must ensure that the multiple emergency stop controls are of the "stop and lock off" type so that the plant cannot be restarted after an emergency stop control has been used unless that emergency stop control is reset.

: Maximum penalty--

(a) in the case of an individual--70 penalty units, or

(b) in the case of a body corporate--345 penalty units.

(2) If the design of plant at a workplace includes an emergency stop control, the person with management or control of the plant at the workplace must ensure that--

(a) the stop control is prominent, clearly and durably marked and immediately accessible to each operator of the plant, and

(b) any handle, bar or push button associated with the stop control is coloured red, and

(c) the stop control cannot be adversely affected by electrical or electronic circuit malfunction.

: Maximum penalty--

(a) in the case of an individual--70 penalty units, or

(b) in the case of a body corporate--345 penalty units.