7—Amendment of regulation 55A—Electronic certificates of compliance
(1) Regulation 55A(1)—delete subregulation (1) and substitute:
(1) For the purposes of section 60(2) of the Act, an electronic certificate of compliance may only be relied on if—
(a) the certificate certifies that—
(i) the electrical installation to which the certificate relates complies with any applicable requirements set out in AS/NZS 3000 and any Australian Standard or Australian/New Zealand Standard called up by AS/NZS 3000; and
(ii) the electrical installation to which the certificate relates has been examined and tested in accordance with the standards and requirements referred to in regulation 56; and
(b) the certificate records the results of that examination and testing; and
(c) the certificate is issued by a registered electrical worker.
(2) Regulation 55A(2)(b)—delete paragraph (b) and substitute:
(b) in any other case—the registered electrical worker must—
(i) before the electrical installation is made available for energisation, complete the electronic certificate of compliance to the extent required by the Technical Regulator under regulation 57; and
(ii) within 30 days after the electrical installation was made available for energisation, provide the electronic certificate of compliance to—
(A) the Technical Regulator; and
(B) the owner or operator of the installation.
(3) Regulation 55A(4)—delete "subregulation (2)(a)(i)" and substitute:
subregulation (2)
(4) Regulation 55A(4)(a)—delete "complete and issue" and substitute:
complete, or complete and issue, (as the case requires)
(5) Regulation 55A(4)(b)—delete "complete and issue" and substitute:
complete, or complete and issue, (as the case requires)