S.R. No. 119/2009
STATUTORY RULES 2009
S.R. No. 119/2009
Road Safety (Vehicles) Amendment (Electronic Stability Control) Regulations 2009
The Governor in Council makes the following Regulations:
Dated: 7 October 2009
Responsible Minister:
TIM PALLAS
Minister for Roads and
Ports
TOBY HALLIGAN
Clerk of the Executive Council
Endnotes
[1] Reg. 3: S.R. No. 29/1999. Reprint No. 4 as at 1 July 2008. Reprinted to S.R. No. 62/2008 and subsequently amended by S.R. Nos 131/2008, 48/2009 and 74/2009.
——
Table of Applied, Adopted or Incorporated Matter Required by the Subordinate Legislation Regulations 2004
Note that the following table of applied, adopted or incorporated matter is included in accordance with the requirements of regulation 5 of the Subordinate Legislation Regulations 2004.
Statutory Rule Provision |
Title of applied, adopted or incorporated document |
Matter in applied, adopted or incorporated document |
Definition of United Nations electronic stability control standard in regulation 105(1) |
Global technical regulation No. 8 published by the United Nations Economic Commission for Europe and established in the Global Registry on 26 June 2008 [ECE/TRANS/180/Add.8], as amended by the Corrigendum established in the Global Registry on 12 November 2008 [ECE/TRANS/180/Add.8/Corr.2] |
The whole |
Definition of forward-control passenger vehicle (MB) in regulation 105(1) |
Vehicle Standard (Australian Design Rule—Definitions and Vehicle Categories) 2005 Compilation 3, dated 19 September 2007, published by the Commonwealth Department of Transport and Regional Services |
The whole |
Statutory Rule Provision |
Title of applied, adopted or incorporated document |
Matter in applied, adopted or incorporated document |
Definition of off-road passenger vehicle (MC) in regulation 105(1) |
Vehicle Standard (Australian Design Rule—Definitions and Vehicle Categories) 2005 Compilation 3, dated 19 September 2007, published by the Commonwealth Department of Transport and Regional Services |
The whole |
Definition of passenger car (MA) in regulation 105(1) |
Vehicle Standard (Australian Design Rule—Definitions and Vehicle Categories) 2005 Compilation 3, dated 19 September 2007, published by the Commonwealth Department of Transport and Regional Services |
The whole |