[Heading inserted: Gazette 6 Dec 1996
p. 6847.]
[r. 11A(2)]
(1) The cabinet or
container is to be constructed of mild steel that is 2 mm thick.
(2) A joint between 2
faces that is butt welded is to have a continuous weld along the full length
of the joint.
(3) A joint where the
edge of one face is folded over the edge of another face is to be stitch
welded, with welds of at least 20 mm in length at intervals of not more
than 100 mm between welds.
(4) Spot welding is
not to be used on the joints between faces.
(5) The cabinet or
container is to be so designed that no firearm or ammunition within it can be
removed from it while it is locked.
(6) In this clause
—
face means a side, the top, or the bottom, of the
cabinet or container.
[Clause 1 inserted: Gazette
6 Dec 1996 p. 6847.]
(1) Doors are to be
recessed into the surrounding frame with margins of not more than 4 mm.
(2) Each edge of the
door and door frame is to be internally supported and have a return of at
least 10 mm.
(3) The cabinet or
container is to have an internal stop of at least 10 mm against which
each edge of the door, other than the hinged edge, closes.
(4) The supports and
stops required by subclauses (2) and (3) are to be welded at the corners.
[Clause 2 inserted: Gazette
6 Dec 1996 p. 6847.]
(1) Hinge protection
is to be provided in such a way that, if the hinges are removed, the door of
the cabinet or container remains in place and locked.
(2) If the hinged edge
of the door is not longer than 1 m, 2 hinges are required on it, and if it is
longer than 1 m, an additional hinge is required for each additional
500 mm or part thereof.
(3) If 2 hinges are
required, the distance between them is to be not less than one‑third of
the length of the hinged edge.
(4) If more than 2
hinges are required the distance between adjacent hinges is to be the same and
that is also to be the distance from each of the outermost hinges to the
nearest end of the hinged edge.
(5) If a spindle is
used instead of hinges, it is to extend the full length of the hinged edge of
the door and is to be attached to the door by welds the number and placement
of which comply with the requirements of subclauses (2), (3), and (4) for
the number and placement of hinges.
(6) If, instead of
using hinges, the door swings on a spindle or on pivots not extending the full
length of the hinged edge of the door, the cabinet or container is to
incorporate a return protecting the hinged edge, along its full length,
against the use of a jemmy.
[Clause 3 inserted: Gazette
6 Dec 1996 p. 6847‑8.]
(1) If the swinging
edge of the door is not longer than 500 mm, one lock is required with a
locking point half way along that edge.
(2) If the swinging
edge is longer than 500 mm but not longer than 1.5 m —
(a) 2
locks are required each with a separate locking point along the swinging edge;
and
(b) the
distance between the 2 locking points is to be not less than one‑third
of the length of the swinging edge.
(3) If the swinging
edge is longer than 1.5 m —
(a) for
each additional 500 mm or part thereof there is to be an additional lock
with a separate locking point along the swinging edge; and
(b) the
distance between adjacent locking points is to be the same and that is also to
be the distance from each of the outermost locking points to the nearest end
of the swinging edge.
(4) It is sufficient
compliance with subclause (2) if, when the swinging edge is longer than
500 mm but not longer than 1.5 m, there is one lock with at least 3
separate locking points.
(5) Each lock is to
have a 5 pin mechanism that deadlocks the bolt in the locked position until it
is properly unlocked.
(6) If the locking
bolt is designed to be released by a handle or lever, the design is to be such
that, if the handle or lever is forcibly removed while the door is locked, the
bolt remains in the locked position.
(7) The cabinet or
container is to be fitted with a protective structure to guard against the
forcible removal of any lock.
(8) In this clause
—
locking point means the point at which the bolt
locks the door to the cabinet or container, preventing the door from opening;
swinging edge means the edge of the door opposite
the hinged edge.
[Clause 4 inserted: Gazette
6 Dec 1996 p. 6848‑9.]
(1) The cabinet or
container is to be securely anchored from the inside at 2 points on each
of 2 separate surfaces to 2 immovable structural surfaces by means
of 8 mm x 75 mm masonry fixing bolts or coach screws, as is
appropriate.
(2) At each anchor
point the cabinet or container is to be reinforced with a 40 mm x
40 mm x 2 mm metal plate, or a 40 mm x 2 mm metal washer,
fitted between the surface of the cabinet or container and the head of the
bolt or coach screw.
[Clause 5 inserted: Gazette
6 Dec 1996 p. 6849.]
This is a compilation of the Firearms Regulations 1974 and includes amendments
made by other written laws. For provisions that have come into operation, and
for information about any reprints, see the compilation table. For provisions
that have not yet come into operation see the uncommenced provisions table.
Citation |
Published |
Commencement |
---|---|---|
29 Mar 1974 p. 1056‑76 |
1 Jul 1974 (see r. 1 and Gazette 29 Mar 1974
p. 1027) | |
Firearms Regulations 1976 |
11 Feb 1977 p. 428 |
11 Feb 1977 |
Firearms (Prohibition) Regulations 1977 |
22 Jul 1977 p. 2358‑9 |
22 Jul 1977 |
Untitled regulations |
14 Oct 1977 p. 3674 |
14 Oct 1977 |
Untitled regulations |
13 Jan 1978 p. 121‑4 |
13 Jan 1978 |
Untitled regulations |
17 Mar 1978 p. 801 |
17 Mar 1978 |
Untitled regulations |
26 May 1978 p. 1617 |
26 May 1978 |
Untitled regulations |
26 May 1978 p. 1617‑19 |
26 May 1978 |
Untitled regulations |
9 Jun 1978 p. 1780 |
9 Jun 1978 |
Untitled regulations |
20 Apr 1979 p. 1051 |
20 Apr 1979 |
Untitled regulations |
29 Aug 1980 p. 3034 |
1 Oct 1980 (see r. 1) |
Reprint of the Firearms Regulations 1974 authorised 29 Jan 1981
(see Gazette 17 Feb 1981 p. 663‑97) (includes amendments
listed above) | ||
Firearms Amendment Regulations 1981 |
24 Jul 1981 p. 3070‑3 |
24 Jul 1981 (see r. 2 and Gazette 24 Jul 1981
p. 3060) |
Firearms Amendment Regulations (No. 2) 1981 |
25 Sep 1981 p. 4094‑5 |
1 Oct 1981 (see r. 2) |
Firearms Amendment Regulations 1982 |
20 Aug 1982 p. 3268‑9 |
1 Oct 1982 (see r. 2) |
Firearms Amendment Regulations 1983 |
27 May 1983 p. 1612‑13 |
27 May 1983 |
Firearms Amendment Regulations (No. 2) 1983 |
10 Jun 1983 p. 1785 |
10 Jun 1983 |
Firearms Amendment Regulations (No. 3) 1983 |
21 Oct 1983 p. 4267‑8 |
1 Nov 1983 (see r. 2) |
Firearms Amendment Regulations 1984 |
26 Oct 1984 p. 3455‑6 |
1 Nov 1984 (see r. 2) |
Firearms Amendment Regulations 1985 |
27 Sep 1985 p. 3810 |
27 Sep 1985 |
Firearms Amendment Regulations 1986 |
26 Sep 1986 p. 3687‑8 |
1 Oct 1986 (see r. 2) |
Firearms Amendment Regulations 1987 |
17 Jul 1987 p. 2789‑90 |
17 Jul 1987 |
Firearms Amendment Regulations (No. 2) 1987 |
14 Aug 1987 p. 3167 |
14 Aug 1987 |
Firearms Amendment Regulations 1988 |
10 Jun 1988 p. 1905‑6 |
10 Jun 1988 |
Firearms Amendment Regulations (No. 3) 1988 |
19 Aug 1988 p. 2914 |
1 Oct 1988 (see r. 2) |
Firearms Amendment Regulations (No. 4) 1988 |
19 Aug 1988 p. 2914‑15 |
19 Aug 1988 |
Firearms Amendment Regulations (No. 5) 1988 |
21 Oct 1988 p. 4241 |
21 Oct 1988 |
Firearms Amendment Regulations 1989 |
23 Jun 1989 p. 1807‑8 |
23 Jun 1989 |
Firearms Amendment Regulations (No. 3) 1989 |
8 Sep 1989 p. 3173‑4 |
1 Oct 1989 (see r. 2) |
Firearms Amendment Regulations (No. 2) 1989 |
29 Sep 1989 p. 3672‑6 |
29 Sep 1989 |
Firearms Amendment Regulations 1990 |
7 Sep 1990 p. 4698‑9 |
1 Oct 1990 (see r. 2) |
Firearms Amendment Regulations (No. 2) 1991 |
30 Aug 1991 p. 4595‑6 |
30 Aug 1991 |
Firearms Amendment Regulations (No. 3) 1991 |
20 Sep 1991 p. 4941‑2 |
1 Oct 1991 (see r. 2) |
Firearms Amendment Regulations (No. 4) 1991 |
20 Dec 1991 p. 6370‑1 |
20 Dec 1991 |
Firearms Amendment Regulations 1991 |
20 Dec 1991 p. 6372‑8 |
20 Dec 1991 |
Firearms Amendment Regulations 1992 |
26 Jun 1992 p. 2796‑7 |
1 Jul 1992 (see r. 2) |
Firearms Amendment Regulations 1993 |
5 Mar 1993 p. 1489 |
5 Mar 1993 |
Firearms Amendment Regulations (No. 2) 1993 |
24 Sep 1993 p. 5291‑2 |
1 Oct 1993 (see r. 2) |
Firearms Amendment Regulations (No. 2) 1994 |
16 Sep 1994 p. 4794‑5 |
1 Oct 1994 (see r. 2) |
Firearms Amendment Regulations 1995 |
22 Aug 1995 p. 3828‑9 |
1 Oct 1995 (see r. 2) |
Reprint of the Firearms Regulations 1974 as at 17 Nov 1995 (includes
amendments listed above) | ||
Firearms Amendment Regulations 1996 1 |
6 Dec 1996 p. 6793‑849 |
6 Dec 1996 (see r. 2 and Gazette 6 Dec 1996
p. 6699) |
Reprint of the Firearms Regulations 1974 as at 28 Jan 1997 (includes
amendments listed above) | ||
Firearms Amendment Regulations 1997 |
24 Sep 1997 p. 5367 |
24 Sep 1997 |
Firearms Amendment Regulations (No. 2) 1998 |
12 Jun 1998 p. 3198‑9 |
1 Jul 1998 (see r. 2) |
Firearms Amendment Regulations 1998 |
4 Sep 1998 p. 4866 |
4 Sep 1998 |
Firearms Amendment Regulations 1999 |
30 Jun 1999 p. 2861‑2 |
1 Jul 1999 (see r. 2) |
Firearms Amendment Regulations 2000 |
30 Jun 2000 p. 3427‑9 |
1 Jul 2000 (see r. 2) |
Firearms Amendment Regulations (No. 2) 2000 |
28 Jul 2000 p. 4015‑18 |
28 Jul 2000 |
Firearms Amendment Regulations 2001 |
1 Jun 2001 p. 2764‑5 |
1 Jun 2001 |
Reprint of the Firearms Regulations 1974 as at 8 Jun 2001 (includes
amendments listed above) | ||
Firearms Amendment Regulations (No. 2) 2001 |
31 Jul 2001 |
31 Jul 2001 |
Firearms Amendment Regulations (No. 4) 2001 |
31 Jul 2001 |
1 Aug 2001 (see r. 2) |
Firearms Amendment Regulations (No. 3) 2001 |
31 Aug 2001 p. 4882‑3 |
1 Sep 2001 (see r. 2) |
Firearms Amendment Regulations 2002 |
28 Jun 2002 p. 3097‑8 |
1 Jul 2002 (see r. 2) |
Firearms Amendment Regulations 2003 |
20 Jun 2003 p. 2243‑5 |
1 Jul 2003 (see r. 2) |
Firearms Amendment Regulations (No. 2) 2003 |
12 Aug 2003 p. 3665‑71 |
12 Aug 2003 |
Firearms Amendment Regulations 2004 |
29 Jun 2004 p. 2539‑41 |
1 Jul 2004 (see r. 2) |
Firearms Amendment Regulations (No. 3) 2004 |
24 Dec 2004 p. 6267‑8 |
1 Jan 2005 (see r. 2 and Gazette 24 Dec 2004
p. 6265) |
Firearms Amendment Regulations (No. 4) 2004 |
24 Dec 2004 p. 6269 |
1 Feb 2005 (see r. 2 and Gazette 24 Dec 2004
p. 6265) |
Firearms Amendment Regulations (No. 2) 2004 |
30 Dec 2004 p. 6974 |
1 Jan 2005 (see r. 2 and Gazette 31 Dec 2004
p. 7130) |
Reprint 5: The Firearms Regulations 1974 as at 15 Apr 2005
(includes amendments listed above) | ||
Firearms Amendment Regulations 2005 |
1 Jul 2005 p. 3001‑3 |
1 Jul 2005 (see r. 2) |
Firearms Amendment Regulations (No. 2) 2005 |
25 Oct 2005 p. 4804 |
25 Oct 2005 |
Firearms Amendment Regulations 2006 |
27 Jun 2006 p. 2299‑301 |
1 Jul 2006 (see r. 2) |
Firearms Amendment Regulations (No. 2) 2006 |
12 Jan 2007 p. 53‑4 |
12 Jan 2007 |
Firearms Amendment Regulations 2007 |
29 Jun 2007 p. 3196‑8 |
r. 1 and 2: 29 Jun 2007 |
Firearms Amendment Regulations (No. 2) 2007 |
16 Nov 2007 p. 5721‑78 |
r. 1 and 2: 16 Nov 2007 (see r. 2(a)); |
Reprint 6: The Firearms Regulations 1974 as at 8 Feb 2008
(includes amendments listed above) | ||
Firearms Amendment Regulations 2008 |
24 Jun 2008 p. 2909‑10 |
r. 1 and 2: 24 Jun 2008 (see r. 2(a)); |
Firearms Amendment Regulations (No. 2) 2009 |
17 Apr 2009 p. 1324‑5 |
r. 1 and 2: 17 Apr 2009 (see r. 2(a)); |
Firearms Amendment Regulations 2009 |
23 Jun 2009 p. 2493‑4 |
r. 1 and 2: 23 Jun 2009 |
Firearms Amendment Regulations (No. 3) 2009 |
17 Jul 2009 p. 2881‑2 |
r. 1 and 2: 17 Jul 2009 (see r. 2(a)); |
Firearms Amendment Regulations (No. 4) 2009 |
6 Nov 2009 p. 4417‑45 |
r. 1 and 2: 6 Nov 2009 (see r. 2(a)); |
Reprint 7: The Firearms Regulations 1974 as at 19 Feb 2010
(includes amendments listed above) | ||
Firearms Amendment (Manufacture of Frangible Ammunition)
Regulations 2010 |
23 Apr 2010 p. 1523‑5 |
r. 1 and 2: 23 Apr 2010 (see r. 2(a)); |
Firearms Amendment (Fees) Regulations 2010 |
18 Jun 2010 p. 2695‑6 |
r. 1 and 2: 18 Jun 2010 (see r. 2(a)); |
Firearms Amendment Regulations 2010 |
31 Aug 2010 p. 4184‑9 |
r. 1 and 2: 31 Aug 2010 (see r. 2(a)); |
Firearms Amendment Regulations 2011 |
4 Feb 2011 p. 396‑7 |
r. 1 and 2: 4 Feb 2011 (see r. 2(a)); |
Firearms Amendment Regulations (No. 2) 2011 |
10 Jun 2011 p. 2106‑8 |
r. 1 and 2: 10 Jun 2011 (see r. 2(a)); |
Firearms Amendment Regulations (No. 3) 2011 |
5 Jul 2011 p. 2826‑33 |
r. 1 and 2: 5 Jul 2011 (see r. 2(a)); |
Reprint 8: The Firearms Regulations 1974 as at 16 Sep 2011 (includes
amendments listed above) | ||
Firearms Amendment Regulations 2012 |
15 Jun 2012 p. 2535-6 |
r. 1 and 2: 15 Jun 2012 (see r. 2(a)); |
Firearms Amendment Regulations 2013 |
28 Jun 2013 p. 2787-8 |
r. 1 and 2: 28 Jun 2013 (see r. 2(a)); |
Firearms Amendment Regulations 2014 |
17 Jun 2014 p. 1990‑2 |
r. 1 and 2: 17 Jun 2014 (see r. 2(a)); |
Firearms Amendment Regulations (No. 2) 2015 |
2 Jun 2015 p. 1947‑8 |
r. 1 and 2: 2 Jun 2015 (see r. 2(a)); |
Firearms Amendment Regulations 2015 |
21 Jul 2015 p. 2939 |
r. 1 and 2: 21 Jul 2015 (see r. 2(a)); |
Firearms Amendment Regulations 2016 |
5 Apr 2016 p. 1025‑7 |
r. 1 and 2: 5 Apr 2016 (see r. 2(a)); |
Police Regulations Amendment (Fees and Charges) Regulations 2016
Pt. 2 |
14 Jun 2016 p. 1826‑33 |
1 Jul 2016 (see r. 2(b)) |
Reprint 9: The Firearms Regulations 1974 as at 5 Aug 2016 (includes amendments
listed above) | ||
Police Regulations Amendment (Captive Bolt Guns) Regulations 2016
Pt. 2 |
29 Nov 2016 p. 5322‑3 |
30 Nov 2016 (see r. 2(b)) |
Firearms Amendment Regulations 2017 |
3 Feb 2017 p. 1113‑14 |
r. 1 and 2: 3 Feb 2017 (see r. 2(a)); |
Police Regulations Amendment (Fees and Charges) Regulations 2017
Pt. 2 |
27 Jun 2017 p. 3440‑8 |
1 Jul 2017 (see r. 2(b)) |
Police Regulations Amendment (Fees and Charges) Regulations 2018
Pt. 2 |
26 Jun 2018 p. 2392‑400 |
1 Jul 2018 (see r. 2(b)) |
Police Regulations Amendment (Fees and Charges) Regulations 2019
Pt. 2 |
21 Jun 2019 p. 2141‑50 |
1 Jul 2019 (see r. 2(b)) |
Police Regulations Amendment (Fees and Charges) Regulations 2020
Pt. 2 |
SL 2020/82 19 Jun 2020 |
1 Jul 2020 (see r. 2(b)) |
Firearms Amendment Regulations 2020 |
SL 2020/140 28 Aug 2020 |
r. 1 and 2: 28 Aug 2020 (see r. 2(a)); |
Police Regulations Amendment (Procurement) Regulations 2020 Pt. 2 |
SL 2020/248 18 Dec 2020 |
1 Jun 2021 (see r. 2(b) and SL 2020/244 cl. 2(b)) |
Police Regulations Amendment (Fees and Charges) Regulations 2021
Pt. 2 |
SL 2021/106 29 Jun 2021 |
1 Jul 2021 (see r. 2(b)) |
Firearms Amendment Regulations 2022 |
SL 2022/40 25 Mar 2022 |
r. 1 and 2: 25 Mar 2022 (see r. 2(a)); |
Police Regulations Amendment (Fees and Charges) Regulations 2022
Pt. 2 |
SL 2022/65 3 Jun 2022 |
1 Jul 2022 (see r. 2(b)) |
Firearms Amendment Regulations (No. 2) 2022 |
SL 2022/190 18 Nov 2022 |
r. 1 and 2: 18 Nov 2022 (see r. 2(a)); |
Firearms Amendment Regulations 2023 |
SL 2023/1 13 Jan 2023 |
r. 1 and 2: 13 Jan 2023 (see r. 2(a)); |
Firearms Amendment Regulations (No. 2) 2023 |
SL 2023/46 19 May 2023 |
r. 1 and 2: 19 May 2023 (see r. 2(a)); |
Police Regulations Amendment (Fees and Charges) Regulations 2023
Pt. 2 |
SL 2023/74 16 Jun 2023 |
1 Jul 2023 (see r. 2(b)) |
Firearms Amendment Regulations (No. 4) 2023 |
SL 2023/91 30 Jun 2023 |
r. 1 and 2: 30 Jun 2023 (see r. 2(a)); |
Firearms Amendment Regulations (No. 3) 2023 |
SL 2023/129 9 Aug 2023 |
r. 1 and 2: 9 Aug 2023 (see r. 2(a)); Regulations other than r. 1 and 2: 10 Aug 2023 (see
r. 2(b) and SL 2023/132 cl. 2) |
Police Regulations Amendment (Fees and Charges) Regulations 2024
Pt. 2 |
SL 2024/94 12 Jun 2024 |
1 Jul 2024 (see r. 2(b)) |
To view the text of the uncommenced provisions see Acts as passed on the WA
Legislation website.
Citation |
Published |
Commencement |
---|---|---|
Firearms Act 2024 s. 441 assented to on 27 Jun 2024 |
31 Mar 2025 (see s. 2(d) and SL 2024/289 cl. 2)
|
1 The Firearms
Amendment Regulations 1996 r. 9(2) reads as follows:
(2) The notation
“PR” endorsed on a licence or permit before the
commencement of this regulation is to be regarded as if it were the
notation “HR”.
Defined terms
[This is a list of terms defined and the provisions where they
are defined. The list is not part of the law.]
Defined term Provision(s)
Act
2(1)
approved Sch. 3 cl. 12(7)
authorised
person 25A(1)
barrel length
Sch. 3 cl. 12(7)
calibre 2(1)
category
2(1)
close associate
6C(2)
current firearm serviceability certificate
2(1)
diversification lease Sch. 3 cl. 12(7)
face
Sch. 4 cl. 1(6)
fee
2(1)
firearm item 2(1)
firearm part
18(1A)
firearm serviceability certificate
25A(1)
firearms safety test 2(1)
Form
2(1)
licence 20(1)
locking point Sch. 4 cl. 4(8)
pastoral lease
Sch. 3 cl. 12(7)
prescribed person
6F(1)
relevant financial interest
6C(1)
relevant position 6C(1)
relevant power
6C(1)
reloaded ammunition
16(2)
revolving rifle 26B(1)
set
24(1)
swinging edge Sch. 4
cl. 4(8)
© State of Western Australia 2024.
This work is licensed under a Creative
Commons Attribution 4.0 International Licence (CC BY 4.0). To view relevant
information and for a link to a copy of the licence, visit
www.legislation.wa.gov.au .
Attribute work as: © State of Western
Australia 2024.
By Authority: GEOFF O. LAWN, Government Printer