Western Australian Current Regulations Western Australian Current Regulations (1) Any person who
manufactures for sale any article intended for use in the installation of an
apparatus for the treatment of sewage, or receptacle for drainage, shall apply
to the Chief Health Officer for registration of a mark or distinguishing brand
to be used for the purposes of this Division.
(2) Every article
intended for use in the construction of an apparatus for the treatment of
sewage shall be legibly marked with the name of the manufacturer or his
registered mark or brand.
(3) The name, mark or
brand referred to in subregulation (2) shall be moulded into the article
at the time of casting or shall be marked by the use of a stencil with a
durable branding material before the article is removed from the factory.
(4) Every septic tank
shall, immediately the moulds are removed, have the words “inlet”
and “outlet” stencilled above their respective openings on the
inside of the pipe.
(5) Every septic tank
shall be marked legibly with the date of its manufacture.
(6) Concrete segments
intended for use in any apparatus shall be so stacked that each day’s
manufacture is segregated from any other day’s manufacture, and each
stack shall be clearly labelled with the date of manufacture and be visible at
all times to a purchaser or inspecting officer.
[Regulation 51 amended: Gazette
29 Jun 1984 p. 1781; 4 Sep 1992 p. 4475;
10 Jan 2017 p. 287‑8.]