(1) A designer of
plant must ensure that the plant is designed so that its noise emission is as
low as is reasonably practicable.
Penalty for this subregulation:
(a) for
an individual, a fine of $7 000;
(b) for
a body corporate, a fine of $35 000.
(2) A designer of
plant must give to each person who is provided with the design for the purpose
of giving effect to it adequate information about —
(a) the
noise emission values of the plant; and
(b) the
operating conditions of the plant when noise emission is to be measured; and
(c) the
methods the designer has used to measure the noise emission of the plant.
Penalty for this subregulation:
(a) for
an individual, a fine of $7 000;
(b) for
a body corporate, a fine of $35 000.
(3) A manufacturer of
plant must ensure that the plant is manufactured so that its noise emission is
as low as is reasonably practicable.
Penalty for this subregulation:
(a) for
an individual, a fine of $7 000;
(b) for
a body corporate, a fine of $35 000.
(4) A manufacturer of
plant must give to each person to whom the manufacturer provides the plant
adequate information about —
(a) the
noise emission values of the plant; and
(b) the
operating conditions of the plant when noise emission is to be measured; and
(c) the
methods the manufacturer has used to measure the noise emission of the plant.
Penalty for this subregulation:
(a) for
an individual, a fine of $7 000;
(b) for
a body corporate, a fine of $35 000.
(5) An importer of
plant must take all reasonable steps to —
(a)
obtain information about —
(i)
the noise emission values of the plant; and
(ii)
the operating conditions of the plant when noise emission
is to be measured; and
(iii)
the methods the designer or manufacturer has used to
measure the noise emission of the plant;
and
(b) give
that information to any person to whom the importer supplies the plant.
Penalty for this subregulation:
(a) for
an individual, a fine of $7 000;
(b) for
a body corporate, a fine of $35 000.
(6) A supplier of
plant must take all reasonable steps to —
(a)
obtain the information the designer, manufacturer or importer is required to
give a supplier under subregulation (2), (4) or (5); and
(b) give
that information to any person to whom the supplier supplies the plant.
Penalty for this subregulation:
(a) for
an individual, a fine of $7 000;
(b) for
a body corporate, a fine of $35 000.