![]() |
Home
| Databases
| WorldLII
| Search
| Feedback
Australian Environmental and Planning Instruments |
Greenhouse and Energy Minimum Standards (Exemption) Instrument (No.5) 2016
Greenhouse and Energy Minimum Standards Act 2012
I, Michelle Crocker, being the person occupying the position of GEMS Regulator, make this instrument under subsections 37(1) and (2) of the Greenhouse and Energy Minimum Standards Act 2012.
Dated 16 September 2016
MICHELLE CROCKER
______________________________
Michelle Crocker
GEMS Regulator
This Instrument is the Greenhouse and Energy Minimum Standards (Exemption) Instrument (No.5) 2016.
This Instrument is made under subsections 37(1) and (2) of the Greenhouse and Energy Minimum Standards Act 2012.
This Instrument commences the day after it is registered.
In this Instrument:
Act means the Greenhouse and Energy Minimum Standards Act 2012.
Determination means the Greenhouse and Energy Minimum Standards (Air Conditioners and Heat Pumps) Determination 2013.
Exempt Models: see section 5.
Note: Several other words and expressions used in this instrument have the meaning given by section 5 of the Act. For example:
• GEMS
• GEMS determination
• GEMS labelling requirements
• GEMS level requirements
• model
• model identifier
• product classes
• supply
The models specified in clause 1 of the Schedule (the Exempt Models) are exempt from the requirements of the Determination as described at clause 2 of the Schedule with respect to the supplies of the exempt model specified at clause 3 of the Schedule.
The conditions at clause 4 of the Schedule are specified for the purposes of subsection 37(2) of the Act.
Note: Subsection 37(2) of the Act provides that the exemption may specify conditions to which the exemption is subject. Subsection 37(3) provides that a person must comply with a condition of an exemption to the extent that it applies to the person.
Brand
|
Model No.
|
---|---|
Mitsubishi Electric
Mitsubishi Electric
Mitsubishi Electric
Mitsubishi Electric
Mitsubishi Electric
|
PFD-P250VM-E
PFD-P500VME
PUHY-P250YJM-A(-BS)
PUHY–P500YSJM-A(-BS)
PQHY–P250YHM-A
|
Requirements of the Determination as follows:
GEMS level requirements (section 6)
|
The model is exempted from the energy use and testing requirements
mentioned in section 6 of the Determination.
|
GEMS labelling requirements (section 7)
|
The model is exempted from the labelling requirements mentioned in section
7 of the Determination.
|
This exemption only applies in relation to the supply of the Exempt Models with the specifications set out in clause 1 above.
There are no conditions to which the exemption is subject.
AustLII:
Copyright Policy
|
Disclaimers
|
Privacy Policy
|
Feedback
URL: http://www.austlii.edu.au/au/other/cth/AUEPI/2016/7.html