Commonwealth Consolidated Regulations

OFFSHORE PETROLEUM AND GREENHOUSE GAS STORAGE (SAFETY) REGULATIONS 2009 - REG 4.16

  (1)   A diving project plan must set out the following matters:

  (a)   a description of the work to be done;

  (b)   a list of the Commonwealth, and State or Territory, legislation (including these Regulations) that the diving contractor considers applies to the project;

  (c)   a list of standards and codes of practice that will be applied in carrying out the project.

  (d)   a hazard identification;

  (e)   a risk assessment;

  (f)   a safety management plan;

  (g)   job hazard analyses for the diving operations;

  (h)   an emergency response plan;

  (i)   the provisions of the DSMS and the Safety Case that are relevant to the diving project, in particular the arrangements in the DSMS and the Safety Case for simultaneous operations and emergency response;

  (j)   details of consultation with divers and other members of the workforce working on the project.

  (2)   The diving project plan must describe each diving operation that is part of the diving project.

  (3)   The diving project plan must not specify as a diving operation a task that is too complex, or too big, to be supervised safely by 1   supervisor.

  (4)   The diving project plan must provide for adequate communications between persons undertaking the project and any relevant:

  (a)   contractor; and

  (b)   facility; and

  (c)   vessel or aircraft; and

  (d)   on - shore installation.