Northern Territory Consolidated Regulations

[Index] [Table] [Search] [Search this Regulation] [Notes] [Noteup] [Previous] [Next] [Download] [Help]

AUSTRALIAN VEHICLE STANDARDS RULES - REG 154H

Label requirements for hydrogen-powered vehicles

For rules 154F(2) and 154G(3), the label must comply with the following:

        (a)     the label is affixed to a plate made of metal that is at least 1 mm thick;

        (b)     the label, and the plate to which the label is affixed, is a regular pentagonal shape:

            (i)     each side of which is 20 mm long; and

            (ii)     each interior angle of which is 108°;

        (c)     the label has a yellow surface that complies with class 2 of Australian Standard AS 1906.1:2017 "Retroreflective materials and devices for road traffic control purposes (Part 1: Retroreflective sheeting)";

        (d)     the label is marked 'H' in a black capital letter that is at least 10 mm high and has the orientation shown in the example;

        (e)     the label, and the plate to which the label is affixed, is affixed to the number plates so that the letter on the label is in an upright position;

        (f)     the label, and the plate to which the label is affixed, does not wholly or partly obscure any characters on the number plates.

Example for rule 154H

1202413.jpg

Note

The example of the label is for illustrative purposes only and does not represent the label's actual size, dimensions or colour.



AustLII: Copyright Policy | Disclaimers | Privacy Policy | Feedback