Northern Territory Consolidated Regulations

AUSTRALIAN VEHICLE STANDARDS RULES - REG 154L

    (1)     For rules 154J(2)(a) and 154K(3)(a), a label must comply with the following:

        (a)     the label is affixed to a plate made of metal that is at least 1 mm thick;

        (b)     the label, and the plate to which the label is affixed, is an equilateral triangular shape:

            (i)     each side of which is 30 mm in length; and

            (ii)     each interior angle of which is 60°;

        (c)     the label has a blue surface that complies with class 2 of Australian Standard AS 1906.1:2017 "Retroreflective materials and devices for road traffic control purposes (Part 1: Retroreflective sheeting)";

        (d)     the label is marked 'EV' in white capital letters that are at least 8 mm high and have the orientation shown in the example;

        (e)     the label, and the plate to which the label is affixed, is affixed to the number plates so that the letters on the label are in an upright position;

        (f)     the label, and the plate to which the label is affixed, does not wholly or partly obscure any characters on the number plates.

Example for subrule (1)

Note

The example of the label is for illustrative purposes only and does not represent the label's actual size, dimensions or colour.

    (2)     For rules 154J(2)(b) and 154K(3)(b), a label must comply with the following:

        (a)     the label, and any plate to which the label is affixed, is an equilateral triangular shape:

            (i)     each side of which is 30 mm in length; and

            (ii)     each interior angle of which is 60°;

        (b)     the label has a blue surface that complies with class 2 of Australian Standard AS 1906.1:2017 "Retroreflective materials and devices for road traffic control purposes (Part 1: Retroreflective sheeting)";

        (c)     the label is marked 'EV' in white capital letters that are at least 8 mm high and have the orientation shown in the example;

        (d)     the label, and any plate to which the label is affixed, is affixed to the vehicle or to a part attached to the vehicle within 100 mm of an edge of the number plate;

        (e)     the label, and any plate to which the label is affixed, is affixed in a manner that shows the letters on the label in an upright position and on the same horizontal plane as the characters on the number plate;

        (f)     the label is visible from the same angles from which the number plate is visible.

Example for subrule (2)

Note

The example of the label is for illustrative purposes only and does not represent the label's actual size, dimensions or colour.